13. Vehicle safety check questions
Vehicle safety questions ('show me, tell me' questions) used by driving examiners in car driving tests, motorcycle tests, vocational driving tests, and tractor and specialist vehicle driving tests (including Highway Code questions).
Tell me questions
T1: Tell me how you would check that the brakes are working before starting a journey.Ìý
A: Brakes should not feel spongy or slack. Brakes should be tested as you set off. Vehicle should not pull to one side.ÌýÌý
T2: Tell me where you would find the information for the recommended tyre pressures for this car and how tyre pressures should be checked.Ìý
A: Manufacturer’s guide, use a reliable pressure gauge, check and adjust pressures when tyres are cold, don’t forget spare tyre, remember to refit valve caps.Ìý
T3: Tell me how you make sure your head restraint is correctly adjusted so it provides the best protection in the event of a crash.Ìý
A: The head restraint should be adjusted so the rigid part of the head restraint is at least as high as the eye or top of the ears, and as close to the back of the head as is comfortable. Note: Some restraints might not be adjustable.Ìý
T4: Tell me how you would check the tyres to ensure that they have sufficient tread depth and that their general condition is safe to use on the road.Ìý
A: No cuts and bulges, 1.6mm of tread depth across the central 3/4 of the breadth of the tyre and around the entire outer circumference.Ìý
T5: Tell me how you would check that the headlights & tail lights are working. (No need to exit vehicle)Ìý
A: Explanation: Operate switch (turn on ignition if necessary), then walk round vehicle. (As this is a “Tell Meâ€� question, there is no need to physically check the lights).Ìý
T6: Tell me how you would know if there was a problem with your anti-lock braking system.Ìý
A: Warning light should illuminate if there is a fault with the anti-lock braking system.Ìý
T7: Tell me how you would check the direction indicators are working. (No need to exit the vehicle)Ìý
A: Explanation: Operate switch (turn on ignition if necessary), then walk round vehicle. (As this is a “Tell Meâ€� question, there is no need to physically check the lights).Ìý
T8: Tell me how you would check the brake lights are working on this car.Ìý
A: Explanation: Operate brake pedal, make use of reflections in windows, garage doors, etc., or ask someone to help.ÌýÌýÌý
T9: Tell me how you would check the power assisted steering is working before starting a journey.ÌýÌý
A: Explanation: If the steering becomes heavy, the system may not be working properly. Before starting a journey two simple checks can be made. Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate. Alternatively turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.Ìý
T10: Tell me how you would switch on the rear fog light(s) and explain when you would use it/them, (no need to exit vehicle).Ìý
A: Operate switch (turn on dipped headlights and ignition if necessary). Check warning light is on. Explain use.Ìý
T11: Tell me how you switch your headlight from dipped to main beam and explain how you would know the main beam is on.Ìý
A: Operate switch (with ignition or engine on if necessary), check with main beam warning light.Ìý
T12: Open the bonnet and tell me how you would check that the engine has sufficient oil.Ìý
A: Identify dipstick / oil level indicator, describe check of oil level against the minimum/ maximum markers.ÌýÌý
T13: Open the bonnet and tell me how you would check that the engine has sufficient engine coolant.Ìý
A: Identify high/low level markings on header tank where fitted or radiator filler cap, and describe how to top up to correct level.Ìý
T14: Open the bonnet and tell me how you would check that you have a safe level of hydraulic brake fluid.Ìý
A: Identify reservoir, check level against high/low markings.
Show me questions
S1: When it is safe to do so can you show me how you wash and clean the rear windscreen.
S2: When it is safe to do so can you show me how you wash and clean the front windscreen.
S3: When it is safe to do so can you show me how you would switch on your dipped headlights.
S4: When it is safe to do so can you show me how you would set the rear demister.
S5: When it is safe to do so can you show me how you would operate the horn.
S6: When it is safe to do so can you show me how you would demist the front windscreen.
S7: When it is safe can you show me how you would open and close the side window.
‘Show me / Tell me� questions
Q1: Identify where you would check the engine oil level and tell me how you would check that the engine has sufficient oil.ÌýÌý
A: Identify where to check level, i.e. dipstick or sight glass. Explain that level should be between max and min marks. For dipstick remove dipstick and wipe clean, return and remove again to check oil level against max/min marks. For sight glass, ensure glass is clean when checking.ÌýÌý
Q2: Show me how you would check that the horn is working on this machine (off road only).ÌýÌý
A: Check is carried out by using control (turn on ignition if necessary).ÌýÌý
Q3: Identify where the brake fluid reservoir is and tell me how you would check that you have a safe level of hydraulic fluid.ÌýÌý
A: Identify reservoir, check level against high/low markings.ÌýÌý
Q4: Tell me how you would check that the lights and reflectors are clean and working.ÌýÌý
A: Explanation only: Operate switch (turn on ignition if necessary), identify reflectors. Check visually for cleanliness and operation.ÌýÌý
Q5: Show me how you would check that the brake lights are working.ÌýÌý
A: Operate brake, place hand over light or make use of reflections in windows, garage doors, etc, or ask someone to help.ÌýÌý
Q6: Tell me how you would check the condition of the chain on this machine.ÌýÌý
A: Check for chain wear, correct tension and rear wheel alignment. Tension should be adjusted as specified in the machine handbook. Drive chain should be lubricated to ensure that excessive wear does not take place.ÌýÌý
Q7: Show me what checks you would make on the steering movement before using the machine.ÌýÌý
A: Handlebars should be free to move smoothly from full left lock to full right lock without any control cables being stretched, trapped or pinched and without any snagging between moving and fixed parts.ÌýÌý
Q8: Tell me how you would check your tyres to ensure that they are correctly inflated, have sufficient tread depth and that their general condition is safe to use on the road.ÌýÌý
A: Correct tyre pressure settings can be found in the owner’s manual. Pressures should be checked using a reliable gauge. Tread depth must be at least 1mm deep, forming a continuous band at least ¾ of the breadth of the tread and all the way around. There should be no lumps, bulges or tears.ÌýÌý
Q9: Show me how you would check the operation of the front brake on this machine.Ìý
A: Wheel the machine forward and apply the front brake.ÌýÌý
Q10: Show me how you would check the operation of the brakes on this machine.ÌýÌý
A: Check for excessive travel on the brake lever and the brake pedal and for unusual play or sponginess.ÌýÌý
Q11: Show me how you would check the operation of the engine cut out switch.ÌýÌý
A: Operate switch, without the engine being started.Ìý
Q12: Show me how you would switch on the rear fog light and explain when you would use it (if fitted).ÌýÌý
A Operate switch (turn on ignition and dipped headlights if necessary). Check warning light is on. Explain use.Ìý
Q13: Show me how you switch your headlight from dipped to main beam.ÌýÌý
A: Operate switch (with ignition or engine on if necessary), check with main beam warning light.
Balance questions
What problems could arise from carrying a pillion passenger?
How should a passenger be carried on the pillion seat?
How would the balance of the machine be affected if you carried a pillion passenger?
Q1: Show me how you would check that all doors including cargo doors are secure.ÌýÌý
A: All doors must be closed and locking levers for cargo doors are set in the recommended secured position.ÌýÌý
Q2: Show me how you would check for air leaks on this vehicle.ÌýÌý
A: Charge the air tanks, consult gauges for drops in air pressure. Walk round vehicle listening for any obvious leaks.ÌýÌý
Q3: Tell me the main safety factors involved in loading this vehicle.ÌýÌý
A: The load should be evenly distributed throughout the length of the vehicle so as not to affect control while the vehicle is being driven. Any load must be carried so that it does not endanger other road users. It must be securely stowed within the size and weight limits for the vehicle. The load needs to be secure so that it cannot move or fall from the vehicle when cornering or braking.ÌýÌý
Q4: Tell me how you would check the condition of the reflectors on this vehicle.ÌýÌý
A: Ensure that all reflectors are fitted, clean, and functional (not cracked or broken).Ìý
Q5: Tell me how you would check the condition of the windscreen & windows on this vehicle.ÌýÌý
A: The windscreen and windows must be clean, clear and free from defects. No mascots or sticker that restrict view.ÌýÌý
Q6: Show me how you would check the condition of the mudguards on this vehicle.ÌýÌý
A: As part of daily walk-round check ensure mudguards and spray suppression equipment are secure.ÌýÌý
Q7: Tell me how you would check your tyres to ensure that they are correctly inflated, have sufficient tread depth and that their general condition is safe to use on the road.ÌýÌý
A: Follow manufacturer’s guide, using appropriate equipment, check and adjust pressures when tyres are cold. Must have a tread depth of at least 1mm across three-quarters of the breadth of the tread and in a continuous band around the entire circumference. There should be no cuts, damage or signs of cord visible at the sidewalls.ÌýÌý
Q8: Tell me how you would check the condition of the windscreen wipers on this vehicle.ÌýÌý
A: Windscreen wipers must operate. Blades should be in good condition.ÌýÌý
Q9: Tell me how you would check the condition of the body is safe on this vehicle.Ìý
A: As part of a daily walk-round check, ensure the body is fully roadworthy and there are no significant defects. No loose panels or items, which could endanger other road users. All inspection panels must be secure.ÌýÌý
Q10: Show me how you would check for the correct air pressure on this vehicle.Ìý
A: Ensure gauges are reading the correct pressures for the vehicle and that all warning lights are extinguished and audible warning devices are not sounding.ÌýÌý
Q11: Identify where you would check the engine oil level and tell me how you would check that the engine has sufficient oil.ÌýÌý
A: Identify dipstick/ oil level indicator, describe check of oil level against the minimum/ maximum markers.Ìý
Q12: Show me how you would check the wheel nuts are secure on this vehicle.Ìý
A: A visual check to identify any nuts that are obviously loose, and check that the wheel nut indicators (if fitted) are in alignment.Ìý
Q13: Show me how you would check the operation (specify horn, warning device for reversing) of the audible warning devices on this vehicle.ÌýÌý
A: Demonstrate use of control.ÌýÌý
Q14: Tell me how you would check the condition of the suspension on this vehicle.ÌýÌý
A: As part of a daily walk-round check, suspension should be checked for any obvious signs of deterioration or damage.ÌýÌý
Q15: Show me how you would check that the brake lights are working on this vehicle (I can assist you, if you need to switch the ignition on, please don’t start the engine).ÌýÌý
A: Operate brake pedal, make use of reflections in windows, garage doors, etc or ask someone to help.ÌýÌý
Q16: Identify where you would check the engine coolant level and tell me how you would check that the engine has the correct level.ÌýÌý
A: Identify high/low level markings on header tank where fitted or radiator filler cap, and describe how to top up to correct level.ÌýÌý
Q17: Tell me how you would check that the headlamps, sidelights & tail lights are working.
A: Explain. Operate switch (turn on ignition if necessary), walk round vehicle.ÌýÌý
Q18: Show me how you would replace the tachograph disc on this vehicle.ÌýÌý
A: Candidate to demonstrate how to insert tachograph disc. Digital tachographs may require an explanation if the candidate does not have a digital cardÌý
Q19: Tell me how you would operate the loading mechanism on this vehicle (vehicle specific ie tail lift).ÌýÌý
A: Candidates should be able to explain briefly the correct operation and safe working practice of specific machinery fitted to the vehicle, e.g. tail lift, kneeling bus.ÌýÌý
Q20: Show me/ explain how you would check that the power assisted steering is working.
A: If the steering becomes heavy the system may not be working properly. Before starting a journey two simple checks can be made. Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate. Alternatively turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.ÌýÌý
Q21: Show me how you would check that the direction indicators are working.ÌýÌý
A: Applying the indicators or hazard warning switch and check functioning of all indicators.Ìý
Q22: Identify where the windscreen washer reservoir is and tell me how you would check the windscreen washer level.Ìý
A: Identify reservoir and explain how to check level.ÌýÌý
Q23: Show me what instrument checks you would make before and after starting the engine on this vehicle.ÌýÌý
A: Check to make sure all gauges and warning systems are working. Ensure that all gauges are reading correctly and that warning lights/ audible warning devices are extinguished before moving away.ÌýÌý
Q24: Show me where the first aid equipment is kept on this vehicle.ÌýÌý
A: Candidate to indicate equipment if carried. Where equipment is not present, candidates should be able to explain under what circumstances (i.e. vehicle types, loads carried) it must be provided.ÌýÌý
Q25: Show me how you would clean the windscreen using the windscreen washer and wipers.Ìý
A: Operate control to wash and wipe windscreen (turn ignition on if necessary).Ìý
Q26: Show me how you would set the windscreen demister to clear the windows effectivelyÌý
A: Set all relevant controls including; fan, temperature, air direction/ source and heated screen to clear windscreen and windows. Engine does not have to be started for this demonstration.Ìý
Q27: Show me how you would switch on the rear fog light(s) and explain when you would use it/them. (No need to exit vehicle)ÌýÌý
A: Operate switch (turn on ignition and dipped headlights if necessary). Check warning light is on. Explain use.Ìý
Q28: Show me how you switch your headlight from dipped to main beamÌýÌý
A: Operate switch (with ignition or engine on if necessary), check with main beam warning light.Ìý
Q1: Tell me how you would check the condition of the body is safe on this vehicle.Ìý
A: As part of a daily walk-round check, ensure the body is fully roadworthy and there are no significant defects. No loose panels or items, which could endanger other road users. All inspection panels must be secure.ÌýÌý
Q2: Show me how you would replace the tachograph disc on this vehicle.Ìý
A: Candidate to demonstrate how to insert tachograph disc. Digital tachographs may require an explanation if the candidate does not have a digital cardÌý
Q3: Tell me how you would operate the loading mechanism on this vehicle (Vehicle specific. e.g. Tail Lift).Ìý
A: Candidates should be able to explain briefly the correct operation and safe working practice of specific machinery fitted to the vehicle, e.g. tail lift, kneeling busÌý
Q4: Show me how you would check that the wheel nuts are secure on this vehicle.Ìý
A: A visual check to identify any nuts that are obviously loose, and check that the wheel nut indicators (if fitted) are in alignmentÌýÌý
Q5: Tell me how you would check the condition of the windscreen wipers on this vehicle.Ìý
A: Windscreen wipers must operate. Blades should be in good condition.ÌýÌý
Q6: Show me how you would check that all doors including cargo doors are secure.Ìý
A: All doors must be closed and locking levers for cargo doors set in the recommended secured position.ÌýÌý
Q7: Tell me how you would check the condition of the reflectors on this vehicle.Ìý
A: Ensure that all reflectors are fitted, clean, and functional (not cracked or broken)Ìý
Q8: Show me how you would check the condition of the mudguards on this vehicle.Ìý
A: As part of daily walk-round check ensure mudguards and spray suppression equipment are secure.ÌýÌý
Q9: Tell me how you would check the condition of the suspension on this vehicle.Ìý
A: As part of a daily walk-round check, suspension should be checked for any obvious signs of deterioration or damage.ÌýÌý
Q10: Show me what instrument checks you would make before and after starting the engine on this vehicle.Ìý
A: Check to make sure all gauges and warning systems are working. Ensure that all gauges are reading correctly and that warning lights / audible warning devices are extinguished before moving away.ÌýÌý
Q11: Tell me the main safety factors involved in loading this vehicle.Ìý
A: The load should be evenly distributed throughout the length of the vehicle so as not to affect control while the vehicle is being driven. Any load must be carried so that it does not endanger other road users. It must be securely stowed within the size and weight limits for the vehicle. The load needs to be secure so that it cannot move or fall from the vehicle when cornering or braking.ÌýÌý
Q12: Show me how you would check for air leaks on this vehicle.Ìý
A: Charge the air tanks, consult gauges for drops in air pressure. Walk round vehicle listening for any obvious leaks.Ìý
Q13: Show me how you would clean the windscreen using the windscreen washer and wipers.Ìý
A: Operate control to wash and wipe windscreen (turn ignition on if necessary).Ìý
Q14: Show me how you would set the windscreen demister to clear the windows effectively.Ìý
A: Set all relevant controls including; fan, temperature, air direction / source and heated screen to clear windscreen and windows. Engine does not have to be started for this demonstrationÌý
Q15: Show me how you would switch on the rear fog light(s) and explain when you would use it/them. (No need to exit vehicle)Ìý
A: Operate switch (turn on ignition and dipped headlights if necessary). Check warning light is on. Explain use.Ìý
Q16: Show me how you switch your headlight from dipped to main beam. (No need to exit vehicle)Ìý
A: Operate switch (with ignition or engine on if necessary), check with main beam warning light.Ìý
Q17: Show me how you would check that the brake lights are working on this vehicle. (I can assist you, if you need to switch the ignition on, please don’t start the engine)Ìý
A: Operate brake pedal, make use of reflections in windows, garage doors, etc or ask someone to help.ÌýÌý
‘Show me� questions
S1: Show me how you would check that the direction indicators are working.Ìý
A: Applying the indicators or hazard warning switch and check functioning of all indicators. (may need to switch ignition on, prompt not to start engine).Ìý
S2: Show me how you would check the brake lights are working on this vehicle, (if youÌýneed to switch the ignition on, please don’t start the engine).Ìý
A: Operate brake pedal, make use of reflections in windows, garage doors, etc, or ask someone to help, (may need to switch ignition on, prompt not to start engine).Ìý
S3: Show me or explain how you would check that the power assisted steering is working before starting a journey.Ìý
A: If the steering becomes heavy the system may not be working properly. Before starting a journey two simple checks can be made. Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate. Alternatively turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.Ìý
S4: Show me how you would check the parking brake (handbrake) for excessive wear; make sure you keep safe control of the vehicle.Ìý
A: Apply footbrake firmly. Demonstrate by applying parking brake (handbrake) so that when it is fully applied it secures itself and is not at the end of the working travel.Ìý
S5: Show me how you would check that the horn is working.Ìý
A: Check is carried out by using control (turn on ignition if necessary).ÌýÌý
S6: Show me how you would clean the windscreen using the windscreen washer and wipers.Ìý
A: Operate control to wash and wipe windscreen (turn ignition on if necessary).Ìý
S7: Show me how you would switch on the rear fog light(s) and explain when you would use it/them, (no need to exit vehicle).Ìý
A: Operate switch (turn on dipped headlights and ignition if necessary). Check warning light is on. Explain use.Ìý
S8: Show me how you switch your headlight from dipped to main beam and explain how you would know the main beam is on.Ìý
A: Operate switch (with ignition or engine on if necessary), check with main beam warning light.Ìý
S9: Show me how you would set the demister controls to clear all the windows effectively.Ìý
A: Set all relevant controls including fan, temperature air direction / source and heated screen to clear windscreen and windows. Engine does not have to be started for this demonstration.Ìý
S10: Open the bonnet, identify where you would check the engine oil level and tell me how you would check that the engine has sufficient oil.Ìý
A: Identify dipstick / oil level indicator, describe check of oil level against the minimum / maximum markers.Ìý
S11: Open the bonnet, identify where you would check the engine coolant level and tell me how you would check that the engine has the correct level.Ìý
A: Identify high/low level markings on header tank where fitted or radiator filler cap, and describe how to top up to correct level.ÌýÌý
S12: Open the bonnet, identify where the brake fluid reservoir is and tell me how you would check that you have a safe level of hydraulic brake fluid.Ìý
A: Identify reservoir, check level against high/low markings.Ìý
‘Tell me� questions
T1: Tell me how you would check that the brakes are working before starting a journey.
A: Brakes should not feel spongy or slack. Brakes should be tested as you set off. Vehicle should not pull to one side.Ìý
T2: Identify where the windscreen washer reservoir is and tell me how you would check the windscreen washer level.Ìý
A: Identify reservoir and explain how to check level.Ìý
T3: Tell me where you would find the information for the recommended tyre pressures for this vehicle and how tyre pressures should be checked.Ìý
A: Manufacturer’s guide, use a reliable pressure gauge, check and adjust pressures when tyres are cold, don’t forget spare tyre, remember to refit valve caps.Ìý
T4: Tell me how you would check your mirrors are secure and correctly adjusted to give you a clear view of the road behind.Ìý
A: Each mirror needs to be adjusted properly so it remains steady under normal driving conditions and gives a clear view of the road behind.Ìý
T5: Tell me how you would check that the headlights & taillights are working. (No need to exit vehicle)Ìý
A: Explanation: Operate switch (turn on ignition if necessary), then walk round vehicle. (As this is a “Tell Meâ€� question, there is no need to physically check the lights).Ìý
T6: Tell me how you would check that the flashing amber beacon is working on this vehicle.Ìý
A: Operate the switch and check its operation.Ìý
Highway Code questions for tractor and specialist vehicle tests:Ìý
Q1: You are driving a slow-moving vehicle on an unrestricted dual carriageway. What must you use to warn other road users of your presence? (if necessary, add ‘if your vehicle was registered later than 1947)ÌýÌý
ÌýA1: A flashing amber beacon. HC Rule 225ÌýÌý
Q2: You are driving a slow-moving vehicle on a single carriageway. What should you do if another vehicle is trying to overtake you?ÌýÌý
A2: Maintain a steady course and speed, slew down if necessary to the let the vehicle pass. Never obstruct drivers who wish to pass. Drop back to maintain a two-second gap if someone overtakes and pulls into the gap in front of you. HC Rule 168ÌýÌý
Q3: You are driving a slow-moving vehicle on a single carriageway. What should you do if you a queue of traffic is building up behind?ÌýÌý
A3: Do not hold up a long queue of traffic. Check your mirrors frequently, and if necessary, pull in where it is safe and let traffic pass. HC Rule 169ÌýÌý
Q4: What action should you take when you overtake a horse and rider?ÌýÌý
A4: Do not rev your engine, sound your horn or accelerate rapidly when you haveÌýÌý
passed. Pass wide and slowly. Look out for horse riders and horse drivers signals and heed a request to slow down or stop. HC Rules 214 & 215ÌýÌý
Q5: You have been driving off road on a muddy site. What should you do before driving your vehicle on the road?ÌýÌý
A5: Ensure the tyres, tracks or rollers are clear of any mud or debris. Ensure windscreen, lights and number plate(s) are clean.ÌýÌý
Q6: You are driving on a single-track road that’s only wide enough for one vehicle. What should you do when you see an oncoming vehicle?ÌýÌý
A6: Pull into a passing place on your left or wait opposite a passing place on your right.ÌýÌý
Give way to road users coming uphill whenever you can. If necessary, reverse until you reach a passing place to let the other vehicle pass. HC Rule 155ÌýÌý
Q7: You have parked your vehicle on a public road. What must you do before leaving your vehicle unattended?ÌýÌý
A7: Switch off the engine and apply the parking brake. HC Rule 123ÌýÌý
Q8: You are crossing or turning right across a dual carriageway and the central reservation is too shallow for the full length of your vehicle. What action should you take?ÌýÌý
A8: Wait until you can cross both carriageways in one go. HC Rule 173ÌýÌý
Q9: As a driver, what must you consider when carrying a load on your vehicle to prevent danger to other road users?ÌýÌý
A9: You must not overload your vehicle or trailer. You must secure your load and it must not stick out dangerously. Make sure any heavy or sharp objects and any animals are secured safely. You should properly distribute the weight. You may need to adjust the headlights. HC Rule 98ÌýÌý
Q10: Driving when you are tired greatly increases your risk of collision. What should you do to minimise this risk?ÌýÌý
A10: Do not begin a journey if you are tired. Get a good night’s sleep before driving. Avoid journeys between midnight and 6am when natural alertness is at its lowest. Take sufficient breaks (15 minutes for every 2 hours of driving). If you feel tired or sleepy, stop in a safe place. HC Rule 91ÌýÌý
Q11: Your doctor has given you a course of medicine. Why should you ask whether it is safe for you to drive whilst taking the medicine?ÌýÌý
A11: To make sure that the medicine will not make you drowsy or impair your ability to properly control your vehicle. You must not drive under the influence of drugs or medicine. HC Rule 96ÌýÌý
Q12: What should you do before driving a vehicle you have never driven before?ÌýÌý
A12: Make sure you know where all the controls are and how to use them. Make sure your mirrors, seat and head restraint are correctly adjusted. Ensure your vehicle is legal and roadworthy. HC Rule 97ÌýÌý
Q13: You are approaching a set of traffic lights; the green light is showing. Which colour light will show next?ÌýÌý
A13: Steady Amber. HC Light signals controlling trafficÌýÌý
Q14: As you approach a set of traffic lights, the green light changes to amber. What should you do?ÌýÌý
A14: Stop at the stop line. You may go on only if the amber appears after you have crossed the stop line or are so close to it that to pull up might cause an accident. HC Light signals controlling trafficÌýÌý
Q15: What shape are traffic signs which give warnings?ÌýÌý
A15: Triangular. HC Traffic signsÌýÌý
Q16: There are double white lines along the centre of the road, the line nearest toÌýyou is solid. When may you cross this white line?ÌýÌý
A16: If it is safe and you need to enter adjoining premises or a side road. You may cross the line, if necessary, provided the road is clear, to pass a stationary vehicle, or overtake a pedal cycle, horse or road maintenance vehicle, if they are travelling at 10Ìýmph (16 km/h) or less. HC Rule 129ÌýÌý
Q17: You are driving along a single carriageway and there is a broken white line along the centre of the road. What does it mean when the lines lengthen, and the gaps shorten?ÌýÌý
A17: There is a hazard ahead. Do not cross the line unless you can see the road is clear and you wish to overtake or turn off. HC rule 127ÌýÌý
Q18: What should you do if you wish to make or receive a phone call whilst you are driving?ÌýÌý
A18: You must not use a handheld telephone. You must exercise proper control of your vehicle at all times. Find a safe place to stop first or use the voicemail facility and listen to messages later. HC Rule 149ÌýÌý
Q19: You are driving a large, slow-moving vehicle and are about to drive over a level crossing. What should you do before crossing?ÌýÌý
A19: Make sure it is safe to cross. Obey any signs or warning lights. Never drive onto the crossing until the road is clear on the other side and don’t get too close to the vehicle in front. You must obey any sign instructing you to use the railway telephone to obtain permission to cross. You must also telephone when clear of the crossing if requested to do so. HC Rules 291-299ÌýÌý
Q20: You are driving a large or heavy vehicle. What should you consider when selecting your route?
A20: Vehicle height, width and weight restrictions. Whether your vehicle can pass safely under any low bridges you will encounter.