Guidance

Septic tank and package treatment plants: liquid effluent pollutants and typical concentrations

Updated 13 January 2017

Effluent analysis

You can expect a typical septic tank or package treatment plant to have a typical range of pollutants. Where this isn鈥檛 appropriate, or if you discharge over 50 cubic metres of effluent a day, you鈥檒l need an analysis of the effluent as part of any quantified risk assessment.

When no other information is available, you can use these values when you carry out a risk assessment for an infiltration system. However, site-specific data is always preferred.

Contaminant Sewage (mg per litre) Septic tank discharge (mg per litre) Package treatment plant (mg per litre) Domestic waste water from single property (mg per litre)
BOD (5 day ATU) about 380 (residential properties) 368 20 - 55 300
COD 677 210 400
Ammonium (as NH4+) - see further information for more details about 50 (residential properties) 104 89 50
Chloride 68.6 88.1
Phosphorus 15.8 10.5 10
Boron 0.84 0.37
Lead less than 0.005
Zinc 0.03 0.01
Copper 0.015 0.007
Iron 0.13 0.04
Cadmium less than 0.002 less than 0.002
Arsenic less than 0.015 less than 0.015
Pharmaceuticals No information No information
Other organic products Sporadic: mineral oil, quintozene, methoxychlor, permethrin, phenol, 4-methyl-phenol, toluene, phthalates Sporadic: mineral oil, quintozene, 4鈥憁ethyl-phenol, toluene, phthalates

Further information

For ammonium (as NH4+), ammonium may be transformed to nitrate in the drainage blanket or unsaturated zone and your risk assessment may need to consider the impact of nitrate on groundwater quality. In theory, 50mg per litre of ammonium (NH4+) could be converted to 172mg per litre of nitrate (NO3-) if there were no losses of nitrogen.

Data sources

You can get further information on the data sources for:

  • sewage (mg per litre) from
  • septic tank discharge and package treatment plant from the Environment Agency - be aware that the effluent quality of package treatment plants will depend on the type of plant and treatment process
  • domestic waste water from single property (mg per litre)