Figure 7.1: accessible version
Published 4 August 2021
漏 Crown copyright 2021
This publication is licensed under the terms of the Open Government Licence v3.0 except where otherwise stated. To view this licence, visit or write to the Information Policy Team, The National Archives, Kew, London TW9 4DU, or email: [email protected].
Where we have identified any third party copyright information you will need to obtain permission from the copyright holders concerned.
This publication is available at /government/publications/radiological-dose-issues-with-interventional-radiology-in-the-uk/figure-71-accessible-version
Flow diagram showing how cumulative air kerma (CAK) can be used as a reference level to anticipate skin damage.
1. Pre-procedure 鈥� has patient undergone fluoroscopically guided procedure within 14 days?
Yes
Check for any sign of skin injury. If found, try to keep this area out of the primary beam 鈥� go to question 2.
No
Go to question 2.
2. During procedure 鈥� does CAK (skin dose) reading reach 2,000 mGy?
Yes
Radiographer to alert the operator. Operator to consider if a change of beam entry area / projection is possible to spare patient skin dose 鈥� go to question 3.
No
No further action.
3. At end of procedure 鈥� is final CAK (skin dose) > 3,000 mGy?
Yes
Go to question 4.
No
No further action.
4. At end of procedure 鈥� is final CAK (skin dose) between 3,000 and 5,000 mGy?
Yes
Issue 鈥楲ow dose鈥� peak skin dose (PSD) pack. Clinician to sign skin dose advice form and discuss the dose with the patient. The form should be placed in the patient鈥檚 notes. Radiographer to record issuing of PSD pack.
No
Issue 鈥楳oderate dose鈥� PSD pack. Clinician to sign skin dose advice form and discuss the dose with the patient. The form should be placed in the patient鈥檚 notes. Radiographer to record issuing of PSD pack.